Learning Center

It might seem weird that we're reviewing seat covers that aren't ours.

We already compared WeatherTech Seat Protectors with TigerTough seat covers. But we wanted to give these a separate review. After all, if we want to make the best seat covers in America, we better know what other seat cover companies are doing well.

We know WeatherTech makes incredible floormats. They’ve been in the business since 1989 and are well-known in the industry for their floor protection. A few of us at TigerTough even rock their mats in our trucks.

But when we were researching our Best Work Truck Seat Covers article, WeatherTech Seat Protectors were mentioned as an option for work trucks. Since we love their floormats, we had high expectations for their seat covers. So we ordered a single cover to fit a 2023 F150 XLT passenger seat to try our best to give an unbiased review.

Let’s see how it holds up.

Watch the video review

Ordering and shipping

WeatherTech wastes no time in shipping. We received our order in just two days!

The seat cover arrived in a plain brown box. This doesn’t affect our review, but we know their floormats come in a branded box, and it’d be cool to see that same thought put into shipping their covers.

Inside the box was the cover, wrapped in protective plastic, an invoice, and the installation instructions. No swag or fanfare. It was just a straightforward package. 

Design and appearance

The weird thing is, WeatherTech does an excellent job of showcasing their Seat Protectors on the rear bench seats of vehicles in their stock photos, but you need to dig a little to find the covers shown on a bucket or captain seat.

But once we installed the set we ordered on our Ford F150, we had that a-ha moment about why WeatherTech didn’t put their bucket seat covers in the spotlight.

It turns out they only offer six different fits for their seat covers–this fit is far from custom, despite searching for a specific vehicle when ordering. It reminds us of those weighted vests the dentist makes you wear before taking x-rays. 

This is a one-piece seat cover, so you won’t get an attractive fit.

The lack of a headrest cover doesn’t help the appearance of an apron, so when you open the door, you can immediately tell this is a seat cover. Also, any grime from your head will still transfer to the headrest. That won’t help with resale value.

Fit

It’s crucial to point out that WeatherTech advises you not to install their seat covers on seats with side airbags. A standard consumer probably doesn’t realize that these airbags were being placed in vehicles starting in the 1990s. As of 1997, a mandate was put in place that all passenger-side seats contain airbags.  

That means you shouldn’t put WeatherTech Seat Protectors on any passenger seat of a vehicle made after 1998. They could work on airbagless rear captain seats if your vehicle has those, but they wouldn't work on the seats of the Ford F150 we tried them on.

Let’s just skip right past that red flag and move on to the control panels. 

The front skirt of the Seat Protectors went over the side control panels of our Ford F150 passenger seat. So if we needed to adjust the seat, we’d have to pick up that fabric curtain to access the controls. That’s not a deal-breaker, but it's inconvenient.

But the back of the seat is a different story.

The back of the seat isn't covered by anything beyond the hook and loop straps that secure the Seat Protector. This might not be a big deal if you don't have passengers in the second row. But either way, it's not going to give you a secure fit.

Despite claiming their seat covers are semi-custom, having six varieties for thousands of different vehicles won’t give you a custom fit.

Manfred from Connecticut was disappointed with how they fit his 2018 Ford F150:

“I found the quality of the material good. The elastic to hold the fabric up against the seat was not very strong and unable to tighten, allowing the back to sag. The ‘grippy’ material on the bottom does not work well with leather seats allowing the bottom to slide forward. It is almost impossible to access the seat belts. There is no way to secure the bottom to the seat allowing the cover to ride up.

“All in all, for a cover that you advertise as a ‘custom’ fit, it is very poorly designed. I have been using the cover for two weeks. For the price and ‘custom’ fit, I expected much better.”

Material

According to their site, the seat covers are “made from a polycotton twill fabric featuring a water-repellent finish, and an extra layer of nylon lining.” 

We’re always fans of anything that will protect your seats from spills. Waterproof would be better, but we won’t be upset over water-repellent. Just get to those messes quickly before any liquid seeps into your seats. 

But the non-slip backing is questionable. Reviews say that it doesn’t work on leather. Dave tried them on his 2014 Ford F150 with leather interior:

“Purchased cover for backseat. So disappointed. Does not stay in place on the leather seats. Keeps folding up. The whole thing is cheap what we got. I'm sorry....but not good. Seats were full of mud on our trip. A blanket would have served better.”

That grippy material on the back is similar to a foam shelf liner. No, we’re not being snarky; that’s what it’s like.

Installation

Installation was quick. We were able to install it in under three minutes. There’s a strap that goes behind the seat and one that goes under. There’s an additional clip that goes around the headrest. Note that if you don’t have headrests, you won’t be able to install this seat cover. 

We’re happy to report that a novice could install these. 

Effectiveness

We didn’t do any of our torture tests with these seats, so we suggest checking out the reviews on the WeatherTech site from people who’ve used these covers in action. They’ll be able to tell you how these have held up in the long run. 

Spoiler alert: Only 50% of customers would recommend the covers. 

Warranty

Here’s where we can give WeatherTech some points. They offer a limited lifetime warranty on their Seat Protectors.

If anything goes wrong with the cover that you couldn’t prevent, WeatherTech will help you out.

Value

The WeatherTech Seat Protectors cost around $300 for a pair of bucket seats. That’s not cheap. And when you consider that the covers don’t protect the back of the seats or the headrest, and you’d have to pay an extra $55 per seat for a seat back protector, you’re looking at over $400 to fully cover your front bucket seats. 

If you have $400 to spend on a pair of seat covers, there are other brands we think you’ll be happier with.

Summary

We wanted to like these but just couldn’t.

On rear bench seats, these could work well for pets or equipment. (Especially if you don’t need the middle seat because center seatbelts won’t be accessible.) If you’re not hauling around humans, this could be a good option, and the humanless options seem to be what positive reviewers are using these for.

But even then, WeatherTech reviewers give the Seat Protectors 3.2 stars out of 5. That’s a 64%, and if we were still in high school, they’d be getting a D. Not something we’d brag about. 

Let’s face it; seat covers aren’t WeatherTech’s bread and butter. They’re known for floormats and other vehicle accessories. So although we love WeatherTech, we wouldn’t recommend their seat covers, and we’re not just saying that as a seat cover company; we’re saying this based on research, testing, and verified customer reviews.

Mike from Pennsylvania gets how we feel:

“I gotten many items from Weathertech over the years. All top grade. But the front seat protector I just purchased is awful. Looks bad, doesn’t fit well, uses Velcro attachments. Just awful. I have it two weeks. Constantly had to refit and re-adjust Velcro. I gave up and took it off. $150 bucks for an absolute failure. Stick to floor liners. Those work great.”

If you’re ready to invest in seat covers that last, take a look at these favorite brands. 

When we researched top seat covers for work trucks, we didn’t just pick the ones at the top of Google. We asked blue-collar men and women what kinds of covers they’ve tried in their trucks, and this is the list they came up with:

Covercraft Endura PrecisionFit
Covercraft Carhartt SeatSavers
Wet Okole
Marathon
Canvasback
ShearComfort CORDURA®
VERTEX OFF-ROAD
TigerTough

Since we’re comparing covers for work trucks, we used a 2023 Ford F150 regular cab for pricing and research. Let’s get right into highlighting these seat-savers.

Note: Covercraft regularly adjusts its ARV to reflect different sales percentages. The prices we show here are their retail prices at the time of publication.

Covercraft Endura PrecisionFit

It’s nearly impossible to Google truck seat covers without Covercraft popping up. We give them credit. They’ve been in the business for over 50 years and have a great product with a stellar reputation. 

They make seat covers and covers for cars, boats, RVs, airplanes, and patio furniture. First, let's take a look at the Endura PrecisionFit. 

The fabric for the Endura PrecisionFit is vague. According to the description, it’s a canvas-nylon-polyester blend. But what does that mean? We contacted customer service to learn more, and they didn’t elaborate beyond the product description. It’s tough to know how durable their covers are without knowing more about the fabric. 

Price: $334

Pros

✅ Waterproof

✅ Airbag-safe

✅ Works with heated and cooled seats

✅ Fits factory seats perfectly 

Cons

❌ Fabric is uncertain

❌ Only a limited warranty available

Verdict

This is a great seat cover, and we don’t think you’ll be disappointed. But it’s at the top of the price range for a set of bucket seat covers for a 2023 Ford F150 Regular Cab. If you can get them on sale, they might be a worthwhile investment, but we can’t say for how long without knowing more about their material.

Covercraft Carhartt SeatSavers

Everyone loves Carhartt. We get it. Their reputation is undeniable. They've got that classic look of your grandpa's favorite jacket; overall, we feel nostalgic about them. The brand has been around since 1889 even though Covercraft Carhartt SeatSavers are newer to the market, so let's look at how these cover stand up to some others.

Price: $379

Pros

✅ Great reputation

✅ You know exactly what you're going to get

✅ Air-bag safe

Cons

❌ Limited colors

❌ Not waterproof

❌ They don't stay in place

❌ Not as durable as other seat covers

Verdict

While we have a lot of respect for Carhartt, when it comes to choosing seat covers, we’d actually lean towards Covercraft’s Endura PrecisionFit over the Carhartt SeatSavers. It's not just about the price; the PrecisionFit covers just seem to fit better and provide more value. If you’re into a variety of colors, you might find the two-color options of these covers a bit limiting. And the two-piece design? It tends to slide around on the seat because of how it's fastened. Since these are an expensive choice, we really hoped for a bit more from them.

Read Covercraft Carhartt vs. TigerTough Seat Covers

Wet Okole

Okay, we know what you’re thinking…this is about work truck seat covers, and most of us aren’t driving around Baywatch trucks. Yep, this is a wet suit in seat cover form. We didn’t think it would be a fair comparison either, but after hearing from multiple people in the construction industry who love their Wet Okole seat covers, we decided to give these a fair shake.

Since they’re made from wetsuit neoprene and bonded with nylon, they’re waterproof and totally safe on vehicle seats. We'll take a look at their standard seat covers without a console cover.

Brent Fox, a contractor in the Nashville area, can speak to the durability. "I had Wet Okole in the truck I just retired. Rode on them for 12 years and, at some point, sent them back for a refurb. They were a great product and an easy company to work with."

Price: $402

Pros

✅ Easily washable

✅ Self-extinguishing 

✅ Airbag safe

Cons

❌ Only a 90-day warranty

❌ No returns accepted

Verdict

These seat covers really do a solid job of protecting the seats in your work truck, almost like a wetsuit, and you can even clean them with wetsuit shampoo. They’re self-extinguishing, which is a big plus if you ever find yourself dealing with flames inside your truck. Plus, they're designed to be airbag-safe because they don’t cover the side of the seat where the airbag is located. Airbag safety is a must for us.

At first, we were a bit skeptical, but these covers have received great reviews. We really appreciate the custom fit and how easy they are to clean. However, at $374 a pair, they’re not exactly budget-friendly, and the very limited warranty makes us a bit hesitant to give them our full endorsement.

Read Wet Okole vs. TigerTough Seat Covers

Marathon

We'll just come out and say it: Marathon used to make a darn good seat cover. But since Covercraft bought them out, the quality has gone downhill. We did a side-by-side comparison of old vs new Marathon seat covers so you can see what we're talking about.

Their covers are made from 1000-denier CORDURA® and we'll take a look at their Excel covers for pricing comparison.

Price: $350

Pros

✅ Lots of colors

✅ Made from CORDURA®

✅ Waterproof

✅ Airbag safe

✅ Many customizable options

Cons

❌ Not made in America

❌ Reports of poor quality since switching manufacturers

Verdict

If you can find old Marathon seats, buy them. They'll be a great investment in protecting your truck.

Read Marathon vs. TigerTough Seat Covers

Canvasback

We won’t lie; we hadn’t heard of this brand until Ambre Schaffer, Marketing Director at Aggtrans, pointed them out. These seat covers are a one-size-fits-most style, so consider that when ordering. You won’t be getting a custom fit for your seats.

Canvasback seems to be best known for their cargo liners. Liners are custom fit for your vehicle’s cargo space and attach with hook and loop.

Ambre confirms the durability and easy installation, “[the cargo liner] is custom fit to your specific vehicle and velcros right in place. They've been installed for three years without budging or showing any signs of wear. If I needed to remove them, they'd pull right up.

"In addition to carrying around all of my photography/videography gear and field gear for construction, I'm a search and rescue handler with a k9. We're usually covered in mud and debris.” 

With a review like that, we had to include this option.

Price: $150

Pros

Durable cargo liners customized to fit most vehicles. Despite not having custom-fit seat covers, the covers are at the bottom of our price range at $140 for a pair of bucket seat covers. On top of all this, Canvasback is woman-owned, and we think that’s pretty cool.

✅ Inexpensive

✅ Fits most vehicles

✅ Woman-owned company

Cons

❌ Not custom fit

❌ Limited six-month warranty

Verdict

We probably wouldn’t put these in a work truck to protect the seats, but we like the cargo liner options. If you’ve got a dog or use your cargo space a good deal, we’d suggest looking into Canvasback. Plus, we can’t help but love that they’re made in Minnesota.

ShearComfort CORDURA® 

Like TigerTough, these covers are made from CORDURA®. It’s a slightly different kind, though. ShearComfort uses a heavy-duty 500 denier CORDURA® fabric, which isn’t as durable as the 1000 Denier CORDURA® we use. But this is still going to be a durable seat cover.

Price: $428

Pros

These airbag-safe seat covers are waterproof, durable, and guaranteed to fit perfectly. There’s a lot to love about them, and they’d perform well in a work truck.

✅ Waterproof

✅ Guaranteed perfect fit

✅ Airbag safe

Cons

❌ They don't use CORDURA® on their entire seat cover

❌ Price is a little high

❌ Limited Warranty

Verdict

They’re tough and built for hard work, but we don't love that ShearComfort doesn't use CORDURA® on the entire seat cover. They only use it on the portions you'd touch when sitting in the seat. The rest is made of a thin, stretchy material which will give out over time. They have great reviews from their customers. ShearComfort is a good option for your work truck, but not the best.

Read ShearComfort CORDURA® 1000 Denier Xtra-Duty vs. TigerTough Seat Covers

VERTEX OFF-ROAD

VERTEX OFF-ROAD is a newer company, started in 2021, and they specialize in truck seat covers. They consider themselves "American craftsman and enthusiasts committed to building top-quality products that help you upgrade and protect your truck for everywhere the road ahead takes you."

Well, what's not to love about that? Let's look at their 1000-Denier CORDURA® Canvas seat covers.

Price: $400

Pros

✅ Use CORDURA® nylon on their colvers

✅ Automatically include a center console cover

✅ Lifetime warranty, albeit limited

✅ Airbag safe

Cons

❌ Foam-backed seat covers (foam breaks down over time)

❌ Limited vehicle line

Verdict

We love that they're using CORDURA® nylon canvas for this particular cover. They also automatically include a center console cover and pockets for the seatbacks. They also have a lifetime warranty and seem pretty flexible, but it does exclude everyday wear and tear. 

This is the first time we've run across another brand that uses a string to cinch around the seat for a secure fit. It's just too bad they don't use StringLock.

This seems like a great cover. These are going to be a durable option for your truck. And given that they come with a center console cover and seatback pockets, the price is fair for what you get.

TigerTough

TigerTough seat covers are designed for hardworking men and women. They’re extremely tough (hence the name).

We put our seat covers through torture tests. Do we do these tests for fun? Yes. Do we love proving how resilient these covers are with each test? Also yes. 

Need more proof that we believe in our products? We have an unconditional warranty for at least two years on our products. They’ll get gross, they’ll get stained, but they won’t fail you, and neither will we.

Price: $317

Pros

✅ Unconditional warranty

✅ Custom fit

✅ Two-week turnaround

✅ Waterproof

✅ Airbag safe

Cons

❌ Limited colors

Verdict 

These are some of the lowest-priced seat covers in this lineup, with an average 4.9 star rating from users. Everyone from parents to first responders uses TigerTough seat covers, and they’ve always risen to the occasion. 

Of course we love our own seat covers (or we wouldn’t work here). But that doesn’t mean they’re best for you and your work truck. Look at all the options and choose the covers that fit you best. 

Summary

Not all seat covers are created equally. Some will be better for you than others. We think you should have ones that:

• Are waterproof
• Easy to clean
• Have a great warranty and return policy
• Made in America

You don’t want to be stuck with seat covers that aren’t getting the job done. You want something that will last for years and ultimately save you money in the long run.

Look at the features of all these work truck seat covers and decide which one is best for you based on your needs and budget.

Update on 07/06/2023: We Initially had WeatherTech Seat Protectors as part of this list but removed them when we found out they weren't considered airbag-compatible in all vehicles. Take a look at WeatherTech Seat Protector Review for more information.

Construction truck (and heavy equipment) cabs see it all: dust, dirt, coffee, sandwich guts. No shortage of debris will find its way onto the seat. So, protecting those seats with a seat cover is smart. But which cover should you go with?

You’ll want something tough, waterproof, antimicrobial if there’s more than one butt in the driver’s seat, and doesn’t bunch up like a sock in a work boot. We could say you should choose TigerTough, but that’s not the only option out there.

We’ll share some of our favorite seat covers, and you can choose which is best for you.

Best Work Truck Seat Covers

We’ve spent many manhours testing out seat covers, trying them. Some have been competitive, others have been disappointing. We won’t waste your time with the seat covers we weren’t impressed with. But no matter what, try to look for these qualities in a truck seat cover:

• Washable
• Waterproof
• Airbag safe
• Separate seatback and bottom
• Good warranty
• Made in the U.S.

We’ll share prices with you based on a 2023 Ford F-150. With all that info in mind, let’s get into these seat covers for construction workers.

Marathon

On paper, Marathon is one of our biggest competitors. Their covers are made from 1000-denier CORDURA®️ in good ole Montana. 

Disclaimer: Marathon recently got acquired by CoverCraft and a few things have changed since then. We just got our hands on a new Marahon by CoverCraft seat cover, and we'll be doing a side-by-side comparison soon. For now, this is based off the original Martahon seat covers.

Pros

• Washable
• Waterproof
• Airbag safe
• Separate seatback and bottom
• Made in the U.S.
• Price is on the lower end
• They have a bunch of accessories you can add to the seat covers

Cons

• Some recent negative reviews about quality on their Google listing
• Camo is only 500-denier CORDURA®️
• Production time is 4-5 weeks
• No returns
• Limited warranty

Price: $315 (with headrests)

Carhartt PrecisionFit

OK, we don’t normally suggest these because the price is steep. But they’re a great option if you’re loyal to Carhartt.

Pros

• Washable
• Water-resistant
• Airbag safe
• Separate seatback and bottom (their SeatSavers aren’t)
• Come with seatback pockets as standard

Cons

• Not exclusively made in the U.S.
• Carhartt duck cotton isn’t as strong as CORDURA®
• Price is high

Price: $560

Wet Okole

People love Wet Okole, despite that the name means “wet butt” in Hawaiian. They fit well and look good on. Raving fans have had Wet Okole on for years. They’re made in California and loved by surfers and construction workers alike.

Pros

• Washable by hand with wetsuit shampoo
• Waterproof (but check out how they absorb liquids)
• Airbag safe
• Separate seatback and bottom (their SeatSavers aren’t)
• Made in the U.S.

Cons

• They’ll protect your seat from liquid, but the cover is designed to hold the liquid, so you’ll literally have a wet butt with spills. Think of it like a diaper--it's going protect your seat from spills, but it's also going to get a little squishy with any wetness.

Price: $374

TigerTough

Our covers are made in Minnesota from American-made materials by American men and women. We design exclusively for the blue-collar world, so you won’t see us offering covers for minivans or coupes anytime soon. Our covers made from 1000-denier CORDURA®️ are put through torture tests so we can confidently say they’re nearly indestructible.

Pros

• Washable
• Waterproof
• Airbag safe
• Separate seat back and bottom
• Unconditional two-year warranty
• Made in the U.S.
• Ships in two weeks or less

Cons

• Limited colors

Price: $297

Best Heavy Equipment Seat Covers

The competition is slim when it comes to heavy equipment seat covers, but there are a few out there. You’re going to want to look for similar things in heavy equipment seat covers:

• Washable
• Waterproof
• Separate seatback and bottom (if applicable)
• Good warranty
• Made in the U.S.

Ultra Seat

This is an aftermarket seat company that makes covers for its seats. It offers only three different kinds of covers: high back, medium back, and low back.

Pros

• Washable
• Separate seatback and bottom
• They fit their seats like a dream, and should also fit Grammer seats well
• The quality seems great
• Made in Canda
• Inexpesive

Cons

• They won’t fit OEM seats well

Price: $168 (high back seat)

TigerTough

Our heavy equipment seat covers are super similar to our vehicle seat covers, except we offer an unlimited, unconditional warranty on them. 

Pros

• Washable
• Separate seatback and bottom
• They fit your heavy equipment seat extremely well
• Made in America
• Unconditional, unlimited warranty

Cons

• Not every make/model of heavy equipment available
• More expensive than the competition

Price: $247 (Cat 312 excavator seat)

Best Seat Covers for Construction

Every cover has its pros and cons. Determine which is best for you and your budget. And if you find a better option, let us know, we’d love to add it to the list!

Seat covers cost money upfront. But are they worth the investment? We think so, but instead of telling you our opinion, we'll shoot it straight to you with the facts.

We'll use $327 for a set of bucket seat covers since that's what the average TigerTough bucket seat covers cost.

1. Repairs and replacements

If you keep your trucks for a while, you'll need to repair ripped-up and damaged seats to improve conditions for the driver/operator (we're looking at you, blue collar folks). It also helps with your brand image. If your crew rolls up in a truck with foam spewing out of the seat, how does that speak to your work?

We asked some customers how much they've paid to repair or replace seats. The average cost to repair or replace seats was $632.50 per seat.

Not only do you have to pay for the seat to be repaired, but there's also truck downtime you need to factor into the cost. 

If a pair of TigerTough seat covers cost you around $327 and an average of $632.50 to repair or replace a seat, you've saved $465 per seat.

Money saved: $455/seat

2. Increased resale value

There comes a time in every truck's life when it's ready for the next journey. And when it comes time to sell, we want you to walk away with the most money you can.

The condition of your interior makes a bigger difference than most people think.

Kelley Blue Book data shows that buyers place just as much importance on interior condition as they do on mileage. Poor interior can knock 10-20% off a vehicle’s value

That’s thousands of dollars you're indexing on whether someone sees torn seats or a spotless cab. On a $30K vehicle, it’s easy to lose $3,000-$6,000 just because the inside looks rough.

A quality set of seat covers (like TigerTough) can keep your cab clean, intact, and buyer-ready. It's not just about staying clean today, it’s about locking in value later.

• A “good” interior vs. a “clean as new” interior can easily cost you the extra thousands.

• In practical terms, that’s more than enough to pay for a top-shelf set of seat covers—and then some.

Spills, snags, dirty kids, or gear don’t just make your cab look rough...they destroy your wallet too. Investing in seat covers now helps keep that value locked in for the long haul.

Money saved: $3,000-$6,000

3. Lease chargebacks

Maybe you lease your vehicles. Check into the charges you get after turning it in; it's normal for leasing companies to work in charges for seat damages.

On average, we see leasing companies charge $1,000-$1,200 for damaged seats. They'll allow some light wear, but if they deem a seat damaged, they'll charge you for the whole dang thing.

Money saved: $683-883

4. Detailing

We realize work trucks might not get detailed very often, but if you drive around a personal vehicle and spill a coffee inside, you'll probably want to get those seats cleaned.

So how much will a nice detail cost you?

An interior detail with deep cleaning can cost around $279. That's not terrible, but do it once and you've paid for a set of seat covers.

Check it out; we've taken a cup of coffee to a TigerTough seat cover to show you what happens:

Spoiler alert: The seat under the cover was totally unscathed. Your lap, on the other hand, might be a different story.

Money saved: $240 after two details

How much money will seat covers save you?

It all depends on how you use your vehicle, but here’s a rough idea:

• Seat repair savings: $465 per seat

• Resale value bump: up to $6,000

• Lease return savings: up to $883

• Cleaning savings: $250+

That’s anywhere from a few hundred bucks to over $6,000 just by throwing a set of tough seat covers on early.

Are seat covers worth it?

Do seat covers cost money? Yes.
Is there a range of prices? Yes.
Are they worth it? Yes. Especially if your vehicle's interior sees equipment, debris, dogs, or kids (like 90% of you reading this).

Do the research and find the best seat cover for your truck, and you'll walk away, saving money in the long run.

WeatherTech is famous in the world of vehicle interior protection. (We admit, that world is pretty tiny, but their presence in it is robust.) They've been in business for decades, are made in America, and offer a decent warranty. What's not to love?

We want to compare WeatherTech with TigerTough seat covers and share our in-the-trenches experience so that you can make an informed decision. We’ll be looking at this as objectively as possible by pointing out the facts, but we’ll be comparing the features and performance with TigerTough.

If you don’t want to read this all, the bottom line is, WeatherTech Seat Protectors are disappointing. Yep, we went there. We know they’re a great company, but their seat covers have many common problems seat covers can face. You can read our WeatherTech Seat Protector review if you'd like more in-depth information.

We ordered charcoal Seat Protectors to cover a 2023 Ford F150. We’ll start with the construction, then go into the individual parts, performance, and pricing.

Watch the video comparison

Installation

Installation was a breeze on the WeatherTech Seat Protectors. It took us under three minutes to get one cover installed. If you’ve ever put a bib on a kid, you’ll be a pro at these. Two straps connect behind the seat, one under the seat, and a stretchy strap around the headrest posts.

TigerTough takes longer. You’ll have to install all three pieces; getting a secure fit takes time.

Design and fit

WeatherTech’s Seat Protectors have a one-piece design and only lay on the front of the seat, and the back is wide open. Think hospital gown.

They offer six variations of their seat cover to fit thousands of makes and models of vehicles. 

TigerTough seat covers come in three pieces and wrap the entire seat, more like coveralls. We customize seat covers to snugly fit thousands of trucks, vans, and SUVs.

Headrest

Well, this section is weird since WeatherTech doesn’t cover headrests. 

They have a strap that goes around the bars of the headrest, but they don’t cover the portion where your head will be. So, all the oils, dirt, grease, etc., will transfer from your head onto your headrest. 

But ironically, you can’t install WeatherTech Seat Protectors unless you have a headrest, or the cover won’t be secure on your seat.

TigerTough’s seat covers have a separate headrest portion that secures with hook and loop so that your headrest remains unscathed.

Seatback

Appearance

The front of the seat back (we know that sounds weird), the part where you rest your back, is where WeatherTech has a standard dog logo patch. Some reviewers didn’t love this logo (we suspect they’re cat people), but it’s harmless.

At TigerTough, you can have a blank seat cover or custom embroidery starting at $19 per seat. This is all about looks, so let’s move on to function.

Function

WeatherTech’s Seat Protectors cover the front of the upright portion of your seat, but they are bare on the backside. See what we mean about the hospital gown?

Two hook and loop straps connect on the back, but they dangle and feel awkward. It would be nice if there were a way to secure the extra length of unnecessary straps. 

You can purchase an additional seat back protector from WeatherTech for $55 each if protecting the back of the seat is important to you. (We’re looking at you, parents.)

TigerTough seat covers wrap around the seat for complete protection and to keep the covers secure. We use the same material on the front as we do on the back. If you'd like to add seat back pockets, that's an option too.

Seat crease 

Since WeatherTech Seat Protectors are one piece, there’s no great way to make a clean crease in the seat. On the plus side, it will catch your crumbs and debris. On a back seat with kids, we could see the benefit of having a crumb-catcher.

The TigerTough seat cover comes in three pieces, so the seat bottom and back are separate, giving you a clean crease.

This is as functional as it is aesthetic. A good fit will keep the seat cover in place, but if you want it to look one way or the other, that’s your preference. 

Seat bottom

WeatherTech has a skirt that goes around the base of the seat. This covered the seat controls on the 2023 F-150 we tried it on. No attachments run under the seat to secure this, so the cover tends to shift as you get in and out of your vehicle.

In comparison, TigerTough seat covers are meant to tuck into the plastic trim of the seat and secure under the seat with straps for a snug fit.

Airbag safety

This isn’t an area to gloss over, and it’s the reason we wouldn’t put WeatherTech Seat Protectors in our own vehicles. Having airbag-compatible seat covers is necessary for your and your passengers' safety.

WeatherTech says not to install their Seat Protectors if the securing straps cover the side seat airbags.

💡 Quick history lesson: most cars made after 2014 will have side airbags due to federal regulation, many deploying from the seat.

The National Highway Traffic Safety Administration estimates that between 1996 and 2012, 2,252 lives were saved by side and curtain airbags–before regulations were even put into place. At that time, only 42% of vehicles on the road were equipped with side airbags. That percentage is much higher now.

We know you take safety seriously, whether it’s in your personal vehicle or if you’re managing a fleet. So if you’re considering WeatherTech Seat Protectors, look to see if the securing straps will cover any side airbags. If they do, find a better option.

Price

This area is perplexing. Each WeatherTech Seat Protector for a captain or bucket seat is $150 each. So protecting your front seats would be $300. Adding back protection to fully cover your front seats with WeatherTech would cost over $400. And you still don’t have your headrests protected.

To fully cover your two front seats with TigerTough, it will be $297 (we used a 2023 Ford F150 for spec). Plus, your headrests are covered.

WeatherTech: $410 (no headrest protection)
TigerTough: $297

Overview

Even if we didn’t work for TigerTough, the facts all point to WeatherTech being inferior. They don’t cover as much, aren’t a custom fit, cost more money, and there’s a good chance they’ll prevent your airbag from deploying.

Even their customers have a hard time justifying the cost of these seat covers when you look at recent reviews:

"WeatherTech should stick to floor liners. Their advertising for this product is very misleading. Be advised the seat cover does not cover the back of the seat and head rest. They are simply velcro strapped in the back to hold it on. And they don't fit, just flapping around. They really look cheap, but cost a lot. They requested my vehicle make and model so the cover would be custom fit. Wrong! They don't fit and are downright ugly! You will be sorry if you buy it. Needless to say, I returned it."

^{George S., Arizona
May 24, 2023
WeatherTech Seat Protector reviewer}

There are many seat covers on the market, so if TigerTough isn’t right for you, there’s probably an option that’s safer and more affordable than WeatherTech.

In construction, tar smears on vehicle seat covers isn't abnormal. A paving company we work with told us about a little secret formula they've been using: brake cleaner and a putty knife to tackle tar on their seat covers.

This method wasn't something we found in any standard cleaning guide, but it was intriguing enough to put to the test.

The Experiment Takes Shape

With a healthy dose of skepticism and a can-do attitude, we launched this experiment. (Can you believe they pay us to do this?)

Our first step was, admittedly, a bit overzealous. We applied the tar liberally, more than was probably necessary. After letting it sit and dry for a couple of days, we came back to assess the situation.

Getting Down to Business

Equipped with brake cleaner and a putty knife, just as recommended, we got down to the nitty-gritty. It was a straightforward process: apply the cleaner, let it soak in briefly, then gently scrape away at the tar. This wasn't a quick wax-on-wax-off kind of job. It required about 15 minutes of diligent work, but to our surprise, the tar came off completely without leaving any damage to the seat or its cover.

A Word of Caution

Even with this success, it's important to note that this isn't your average cleaning hack. Brake cleaner is strong stuff, designed for mechanical parts, not fabric. And while a putty knife can be a handy tool, there's always a risk of nicking or cutting the material if you're not careful.

So, while we can vouch for the effectiveness of this method in our experience, it's not something we'd recommend without reservations. It's critical to use this approach with caution, understanding the potential risks to both safety and the materials you're working with.

And just like grease on seat covers, we'd recommend tossing the cover in the wash after removing tar. 

This unconventional cleaning method goes to show that sometimes, the most effective solutions come from the field, born out of necessity and practical know-how. However, it's always crucial to balance innovation with caution, particularly when dealing with powerful chemicals and manual tools. For those in the blue-collar sectors, where ingenuity meets hard work, such experiments can be part of the job. 

Snow, slush, below-freezing temps…there’s a lot your truck's interior will see this winter. 

Seat covers will absolutely protect your seat from the elements. We feel two characteristics make a cover specifically good for winter: waterproof and safe with heated seats. We suggest avoiding foam-back covers since those don’t always play nicely with heated seats.

So here are some of our favorite seat covers that meet this criteria.

Pricing is based on 2023 Ford F-150 seats.

Most Color Options: ShearComfort Waterproof CORDURA® Seat Covers

If you’re looking for something that will blend with your interior best, ShearComfort may have it. They have ten options for colors on their custom seat covers.

We’ve reviewed their 1000-Denier seat covers before, but we added these to the list since they’re more affordable. However, these are only made of 500-Denier CORDURA®, so they won’t be as tough as the other options listed here. We love CORDURA®, and these are waterproof and will work with your heated seats.

Price: $405

Fastest Production: Northwest CORDURA® Pro-Gard

Northwest offers 1000-Denier CORDURA® (just like us) which is obviously something we can get down with. Their Pro-Gard covers are waterproof and can take a beating. These seat covers will absolutely protect your seats from snow and sleet, and the material plays nicely with heated seats.

We’re super impressed with Northwest’s 2-4 day turnaround and fast shipping. It’s a little intimidating for us to write about since our non-stock items ship in a little under three weeks, but we’re committed to being honest with you. So there you have it. 

Price: $407

Best Warranty: TigerTough CORDURA® Seat Covers

We may take a little longer to ship out custom products (our in-stock items ship out immediately). But we’re a brand built for blue-collar men and women, so we have a warranty to back that up. We offer an unconditional two-year warranty on our seat covers. No matter how you mess it up, we’ll repair or replace it for you.

Our seat covers are waterproof, will fit your seats like a freaking glove, and are basically indestructible. They work with heated seats and will prevent winter crap from harming your seats. Heck, they’ll even keep your seats safe from a dog covered in slush. 

Price: $297

Best Budget-Friendly Option: Canvasback

Canvasback isn’t a custom fit but a universal one. So it’s not one that’s going to fit your seat like a glove, but it will protect it from winter abuse. They also have quite a few color options to choose from.

Your heated seats should work fine with these, but we couldn’t find any definitive info. 

Either way, these are the lowest price point and a great option if you want to winterize your interior on a budget.

Price: $150 

What to Look For in Seat Covers

When you’re shopping for seat covers to winter-proof your truck’s interior, look for covers that are waterproof, work with heated seats, and have a great warranty that will protect your investment. We also love a cover that’s made in America, but that choice is up to you.