A lot of seat covers suck.
They fall short on fit, installation, warranty, and wear. We've reviewed some of the top seat cover brands on the market, and even some of those have struggles.
So here are eight roadblocks we hear when it comes to buying seat covers. We've addressed them to eliminate the suckage.
Problem 1: Seat Covers Suck to Install
First off, any seat cover that fits well will take a little time to install. If it just slips on, it will slip right off the first time you sit on it.
We’ve worked our tails off to ensure that TigerTough seat covers don’t suck to install. It won’t be a breeze, but we'll make it as easy as possible.
- Everything is held on the seat with hook and loop fasteners (you may call this VELCRO, but that's a brand name, and we aren't allowed to call it that) except a string that runs under the seat. That’s held together with our patented Stringlock. More on that later.
- When designing a new seat cover, we also shoot a detailed install video and write up an install guide for that seat. We don’t do generic instructions because vehicles aren’t generic.
- TigerTough seat covers aren’t one-piece covers. The back, bottom, and headrest of your seat are all covered with separate covers, so you can work on one section at a time and end up with something that fits properly.
- There’s a very fine line between seat covers that fit well and feeling like you’re putting five pounds of potatoes in a four-pound sack. We tip-toe right down that line. Johnny Cash would be proud.
Problem 2: Seat Covers Never Stay In Place
- Everything is held on with hook and loop, string, and the Stringlock. None of these have any “give.” Your cover is secure once you’ve snugged everything up, pulled it tight, and slammed it into place. We don’t secure anything with elastic or adjustable clips because elastic stretches as soon as you put pressure on it, and adjustable clips tend to self-adjust over time.
- This is another reason for the three-piece cover. When you can completely wrap the seat back, bottom, and headrest separately, the seat cover conforms to the seat's shape and has no room to move.
- Everything is fully wrapped. Rather than run straps under the seat where you can’t see them, we run the cover all the way under the seat and connect it together in the back. Some seat covers are like aprons. Ours is like a pair of trusty coveralls. Which would you prefer on the job?
- Stretchy fabric is notorious for moving around. Since TigerTough seat covers are made from tough, tightly woven fabric, there is no stretch at all.
Problem 3: Seat Covers Never Fit Right
Every TigerTough seat cover is designed specifically for one seat style or one vehicle.
Here’s how the process works:
- We get the seat into our factory for the most accurate measurements.
- Our design team spends 2-3 days designing a cover that matches the seat exactly.
- We install the cover, taking detailed install photos and videos so you can see precisely how it goes when installing it.
If you’re hesitant to use seat covers based on past experiences with covers that fit like socks on a rooster, you have every right to be!
No seat cover we make is designed from pictures or manufacturer specs. It’s all done the hard way, by hand, using the seats they'll cover.
Problem 4: They’re Unsafe
You’re probably thinking about those “universal-fit” babies with the bungee cords crisscrossed down the sides, right? Those definitely are unsafe. Or maybe safety never even crossed your mind.
Any TigerTough seat cover designed for seats with airbags built into them is designed to tear open exactly as the factory seat does if the airbag deploys.
A third-party lab independently tests our designs to ensure they work just as they should.
Problem 5: They’re Ugly
Well, this is pretty subjective. Beauty is in the eye of the beholder, right?
Seat covers have come a long way, though, and you can likely find a cover in a style that suits you. Heck, even Carhartt has covers now.
We design for performance first, not looks. You won’t find bright colors, crazy patterns, or luxury quilting on any of our seat covers.
The fanciest we get is camo covers and custom embroidery.
We skip the decorative stitching so the covers are as tough as possible and look a little plainer than the factory seats.
If you want something that looks like a custom interior, you may not love our covers. If you’re looking for something that’ll keep your seats in good shape for as long as you own the truck, you’ll think they’re perfect.
Problem 6: They Wear Out
Remember the cheap parts store ones that we talked about? Those do wear out.
If you’re going to spend good money on seat covers to keep your seats looking good, you’re kinda getting the short straw if they’re made from cheap, stretchy fabric that wears out in a few months. Leave that material for yoga pants, not your truck.
You can be confident that your TigerTough covers aren’t going to give up on you. Since they’re designed for work, they’re made from military-grade fabric. The solid colors are made from the strongest fabric, a 1000-denier CORDURA, and the camos are made from almost-as-tough 900-denier polyester.
They’ve got a two-year unconditional warranty and we really mean unconditional. If anything wears out or breaks for any reason, we’ll fix or replace it. (But we want to hear how it happened because we know there's a good story behind it.)
Here’s how a set looks after eight years and 235,000+ miles in a heavy equipment service truck:
Problem 7: They’re Sweaty
You had pleather seat covers once, didn’t you? Or did you buy some cheap vinyl ones once that gave you flashbacks of your days on a school bus?
Gross. We don't blame you for wanting to steer clear.
Both of our fabrics are breathable so you won’t have to deal with swamp@** or peeling any bare skin off your seats. These won’t feel any different than your factory seat as far as being breathable or making you sweaty.
When spending hard-earned cash on your truck, ensure you get breathable seat covers.
Problem 8: You're Not Sure What to Get
This is tough. First, we recommended finding the best brand for what you need. But if they don't have a good tool to find the right seat covers for your truck or SUV, it's like wandering a new city without GPS.
We’ve designed the lookup on our website to make it easy to find the covers for your vehicle. All you need to know are the following details.
- The year (2020)
- The Make (Ford)
- The Model (F150)
- The Trim Package (XLT)
- The Cab Type (SuperCrew)
Once you punch in all that info, we’ll show you only the seat covers that will fit your truck! If there could be a couple of different seat configurations in your vehicle, we’ll show you the different options and explain the differences between the two.
Find the best seat covers for your truck
If you're still not sold on seat covers, that's okay. But here's our list of things you should consider when shopping around:
- Multiple-piece covers
- Made in the U.S.A.
- A strong warranty
Seat covers are an investment, and you want to be sure you're making the smartest choice for your needs.